Spontaneous and piezoelectric polarization effects on the outputcharacteristics of AlGaN/GaN heterojunction modulation doped FETs

We report on the calculation of electrical characteristics of AlGaN/GaN heterojunction field effect transistors (HFETs). The model is based on the self-consistent solution of the Schrodinger and Poisson equations coupled to a quasi-2D model for the current flow. Both single and double heterojunction devices are analyzed for [0001] or [000-1] growth directions. The onset of a parasitic p-channel for particular growth directions and alloy concentrations is also shown     

Breakdown quenching in high electron mobility transistor by usingbody contact

In this paper, the effect of a body contact (BC) to quench breakdown effects and increase the breakdown voltage in high-electron mobility transistors (HEMTs) is theoretically investigated. The body contact is formed by a highly p-type doped substrate connected to an ohmic back contact. By means of a two-dimensional (2-D) self consistent Monte Carlo simulator we show that the BC prevents holes generated by impact ionization (II) from accumulating in the channel and in the buffer, thus inhibiting the parasitic bipolar effect (PBE). This improves the breakdown behavior and extends the range of the usable drain voltages     

Liquid-crystallization induced reactions. Microstructure and morphology of copolyesters synthesized by transesterification of PET with some LCP monomers

The transesterification of poly(ethylene terephthalate) (PET) with a mixture of sebacic acid (S), 4,4′-diacetoxybiphenyl (B) and 4-acetoxybenzoic acid (H), carried out under conditions expectedly favoring the formation of a p(ET-SBH) random copolyester, produces biphasic materials with an isotropic matrix and a highly fibrous, liquid-crystalline dispersed phase. Spectroscopic, calorimetric, microscopic and diffractometric characterization of the fractions separated by solvent extraction has shown that the two phases consist of practically random copolyesters having different average composition. Interestingly, the degree of aromaticity of the matrix is even lower than that of PET, whereas that of the minor phase is appreciably higher than that calculated for the SBH copolyester that would be produced from the monomer mixture in the absence of PET. This unexpected result is interpreted on the basis of an enthalpy-driven progressive diffusion of aromatic-rich material toward the mesophase which segregates at an early stage of the polycondensation within the isotropic mixture of low molar mass oligomers initially produced by the PET acidolysis. Thus, an increasing differentiation, rather than an equilibration, of the composition of the two phases takes place. It is noteworthy that, despite the strong compositional difference, the two phases of these products show fairly good compatibility and interfacial adhesion.     

Pyrolysis of glass-hardened polyamides used in the automotive industry

Thermogravimetry and on-line flash pyrolysis–gas chromatography–mass spectrometry were used for studying thermal decomposition processes in filled polyamides deriving from used cars. The thermal decomposition of each polymer begins at about 350 °C and proceeds with a weight loss of 100% for the non-glass fibres, under nitrogen atmosphere. The analysis of the pyrolyzate compounds shows that from polyamide 66, the most abundant product volatile at degradation temperatures is cyclopentanone, while from polyamide 6 there is a considerable yield of ε-caprolactam. This revised version was published online in November 2006 with corrections to the Cover Date.     

Local surface interpolation with Bézier patches

A surface interpolation method for meshes of cubic curves is described. A mesh of cubic curve is constructed between the given vertices. This mesh is filled with Bézier patches, so that the surface is represented as a union of geometrically continuous bicubic quadrilateral and/or quartic triangular Bézier patches. The method is local and uses Farin's [Farin '83] conditions of G¹ continuity between patches. The procedure for finding the needed control points of the Bézier patches is simple and efficient.     

达涅利薄板坯连铸连轧设备最新技术成果

给出达涅利薄板坯连铸连轧技术的最新应用成果.这些成果表明,达涅利技术不仅用于生产普通钢种,还可用于生产质量要求严格的优质钢种和高附加值产品.由达涅利在尼兹尼.诺夫戈罗德区Vyksa建设1套CRC(连铸连轧)设备.这是在俄罗斯建设的第1套薄板坯连铸连轧设备,也是世界上第1套利用薄板坯连铸连轧工艺路线生产北极高寒地区用API管线钢的生产设备.另外2套设备已在中国唐山钢铁集团有限公司和本溪钢铁集团有限公司进入满负荷生产阶段,前者一直保持着设备生产能力世界纪录,后者则成为中国第一家利用薄板坯连铸连轧工艺生产硅钢的厂家.     

Computation of Brillouin scattering cross-sections for multilayers

Acoustic Green's function allows the analysis of localisation of acoustic modes and of their possible confinement. Electromagnetic Green's function allows a consistent analysis of both scattering mechanisms (elasto-optic and ripple) and their interference. The computed cross-section is directly comparable with experimental spectra.